Sharp NP-PH3501QL User Manual - NEC - Page 125

5. Using On-Screen Menu Conditions for using tiling • All the projectors need to fulfil the following conditions. • The panel size must be the same • The projection screen size must be the same • The left and right ends or top and bottom ends of the projection screen must be consistent. • The settings for the left and right edges of the edge blending are the same • The settings for the top and bottom edges of the edge blending are the same If the tiling conditions are satisfied, the video screen of the projector at each installation position will be automatically extracted and projected. If the tiling conditions are not satisfied, adjust the video screen of the projector at each installation position using the zoom function. • Assign a unique control ID to each projector. • Set the "Color setting" and "DeepColor setting" on your Blu-ray player or computer to "Auto". Refer to the owner's manual accompanied with your Blu-ray player or computer for more information. Tiling setting example) Number of horizontal units = 2, Number of vertical units = 2 [MULTI SCREEN] Horizontal order = Second unit Vertical order = First unit WHITE BALANCE This adjusts the white balance for each projector when projecting using a combination of several projectors. This can be adjusted when [MODE] is set to [ON]. CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B Adjusting the white color of the video. BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B Adjusting the black color of the video. 108