Sharp NP-PH3501QL User Manual - NEC - Page 43
Detecting the Signal Automatically, buttons to match the target input terminal and then press
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Projecting an Image (Basic Operation) Detecting the Signal Automatically Press the SOURCE button for 1 second or longer. The projector will search for the available input source and display it. The input source will change as follows: HDMI1 → HDMI2 → DisplayPort1 → DisplayPort2 → HDBaseT → SDI1 → SDI2 → SDI3 → SDI4 → SLOT...... TIP: If no input signal is present, the input will be skipped. • Press it briefly to display the [INPUT] screen. Press the ▼/▲ buttons to match the target input terminal and then press the ENTER button to switch the input. To delete the menu display in the [INPUT] screen, press the MENU or EXIT button. 26
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/43.png)
26
2. Projecting an Image (Basic Operation)
Detecting the Signal Automatically
Press the SOURCE button for 1 second or longer. The projector will
search for the available input source and display it. The input source will
change as follows:
HDMI1
→
HDMI2
→
DisplayPort1
→
DisplayPort2
→
HDBaseT
→
SDI1
→
SDI2
→
SDI3
→
SDI4
→
SLOT……
TIP: If no input signal is present, the input will be skipped.
•
Press it briefly to display the [INPUT] screen.
Press the
▼
/
▲
buttons to match the target input terminal and then press
the ENTER button to switch the input. To delete the menu display in
the [INPUT] screen, press the MENU or EXIT button.