Sharp NP-PH3501QL User Manual - NEC - Page 58
(9) Adjusting the brightness [LIGHT MODE], Press LIGHT ADJ button on the cabinet., Press
![]() |
View all Sharp NP-PH3501QL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. Convenient Features ❾ Adjusting the brightness [LIGHT MODE] When the light mode is set, you can adjust the output of the unit to a range of 30* - 100% (in increments of 1%) and control the brightness after adjustment to keep it constant. * PH2601QL: 40% There are two ways to set the light mode. Function name REF. LIGHT MODE LIGHT MODE Description Adjust the brightness and save it as a common value for all input signals. Valid when the [MODE] (→ page 83) is set to [STANDARD]. Adjust the brightness and save it for each input signal. Valid when the [MODE] (→ page 83) is set to [PROFESSIONAL]. Page 113 85 1. Press LIGHT ADJ button on the cabinet. • In another way, press ECO/L-SHIFT button on the remote control. When [STANDARD] is selected for [MODE] The [REF. LIGHT MODE] screen will be displayed. When [PROFESSIONAL] is selected for [MODE] The [LIGHT MODE] screen will be displayed. 2. Press the ◀▶ button to adjust. To keep the brightness after adjustment constant, set [CONSTANT BRIGHTNESS] to [ON]. Press the MENU button to cancel the menu screen. TIP: • Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, sensors inside the projector detect brightness and automatically adjust the output, thereby maintaining a constant brightness throughout the life of the light module. However, if output is already at its maximum, brightness will decrease with use. 41
![](/manual_guide/products/sharp-npph3501ql-user-manual-nec-1f2fc0d/58.png)