Sharp XG-C55X XG-C55X Operation Manual - Page 21

Connecting the Power Cord Plug in the supplied power cord into the AC socket on the rear of the projector. Supplied accessory Power code Connections and Setup Connecting the Projector to a Computer Connecting to a Computer Using the RGB Cable 1 Connect the projector to the computer using the supplied RGB cable. • Secure the connectors by tightening the thumbscrews. 2 To input audio signal, connect the projector to the computer using the computer audio cable (commercially available or available as Sharp service part QCNWGA013WJPZ). Note • See page 93 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • When connecting the projector to a computer in this way, select "RGB" for "Signal Type" in the "Picture" menu. See page 46. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Projector Dealer or Service Center. • Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual for switching the computer signal output settings. Supplied accessory Notebook computer To RGB output terminal To audio output terminal RGB cable 1 RGB cable 2 Computer audio cable (commercially available or available as Sharp service part QCNWGA013WJPZ) -17