Sharp XG-C55X XG-C55X Operation Manual - Page 26
Controlling the Projector by a Computer, Connecting to a, Computer Using a DIN, D-sub RS-232C Adaptor
UPC - 074000364219
View all Sharp XG-C55X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting the Projector to Other Devices Controlling the Projector by a Computer Connecting to a Computer Using a DIND-sub RS-232C Adaptor and an RS-232C Serial Control Cable When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS-232C adaptor and an RS-232C serial control cable (cross type, sold separately), the computer can be used to control the projector and check the status of the projector. See page 89 for details. 1 Connect the supplied DIN-D- sub RS-232C adaptor to an RS232C serial control cable (sold separately). 2 Use the above cables to con- nect the projector and the computer. Note • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer. • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See page 88 for connection of an RS232C serial control cable. Supplied accessory DIN-D-sub RS-232C adaptor Optional cable RS-232C serial control cable AN-C10RS (32'10" (10.0 m)) RS-232C terminal Desktop computer DIN-D-sub RS-232C adaptor RS-232C serial control cable (sold separately) -22