Sharp XG-C55X XG-C55X Operation Manual - Page 22
Connecting the thumbscrew cables, Plug and Play function when connecting to a 15-pin terminal
UPC - 074000364219
View all Sharp XG-C55X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting the Projector to Other Devices Connecting the thumbscrew cables I Connect the thumbscrew cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug. I Do not remove the ferrite core attached to the RGB cable. Ferrite core "Plug and Play" function (when connecting to a 15-pin terminal) I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. I Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -18