Home » Sharp Manuals » Projectors » Sharp XG-C55X » Manual Viewer

Sharp XG-C55X XG-C55X Operation Manual - Page 88

AC outlet and then turn the power on again., the lamp may not be lit. In this case

UPC - 074000364219

Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Maintenance Indicators Info • If the temperature warning indicator illuminates, and the projector enters the standby mode, follow the pos- sible solutions on the previous page and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) • If the power is turned off for a brief moment due to power outage or some other cause while using the projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the AC outlet and then turn the power on again. • If you want to clean the air vents during projector operation, be sure to put the projector into the standby mode. After the cooling fan has stopped, clean the vents. • Do not unplug the power cord after the projector has entered the standby mode and while the cooling fan is running. The cooling fan runs for about 90 seconds. -84

Section	Page
Introduction	5
Outstanding Features	7
Contents	8
IMPORTANT SAFEGUARDS	10
How to Access the PDF Operation Manuals (Windows, Macintosh)	13
Part Names	14
Projector (Front and Top View)	14
Projector (Rear View)	15
Remote Control (Front View)	16
Remote Control (Front View)	16
Using the Remote Control	17
Available Range of the Remote Control	17
Inserting the Batteries	17
Accessories	18
Connections and Setup	19
Connecting the Projector to Other Devices	20
Before Connecting	20
This projector can be connected to:	20
Connecting the Power Cord	21
Connecting the Projector to a Computer	21
Connecting to Video Equipment	23
Connecting to an Amplifier	25
Controlling the Projector by a Computer	26
Connecting to a Monitor	27
Using as a Wired Remote Control	27
Using the Wireless Presentation Function of the Remote Control	28
Setup	29
Using the Adjustment Feet	29
Adjusting the Lens	30
Setting up the Screen	31
Screen Size and Projection Distance	32
Projecting a Reversed/Inverted Image	36
Basic Operation	37
Image Projection	38
Basic Procedure	38
Selecting the On-screen Display Language	40
Turning the Power off	41
Correcting Trapezoidal Distortion (Keystone Correction)	42
Menu Bar Items	44
Using the Menu Screen	46
Menu Selections (Adjustments)	46
Menu Selections (Settings)	48
Adjusting the Picture	50
Adjusting Image Preferences	50
Selecting the Signal Type	50
Progressive Mode	51
Adjusting Computer Images	52
Computer Image Adjustment	52
Saving Adjustment Settings	52
Selecting Adjustment Settings	53
Special Mode Settings	53
Checking the Input Signal	53
Auto Sync Adjustment	54
Auto Sync Display Function	54
Easy to Use Functions	55
Selecting the Picture Display Mode	56
Displaying a Still Image	58
Enlarging a Specific Portion of an Image	59
Gamma Correction Function	60
Displaying Dual Pictures (Pict in Pict)	61
Black Screen Function	62
Displaying the Break Timer	63
Color Management System (C. M. S.)	64
Selecting the Color Reproduction Mode	64
Selecting the Target Color	64
Setting the Brightness of the Target Color	65
Setting the Chromatic Value of the Target Color	65
Setting the Hue of the Target Color	65
Resetting User-Defined Color Settings	66
Overview of All Color Settings	66
Setting the Audio Output Type	67
Setting on/off the Internal Speaker	67
Auto Search Function	68
Video Digital Noise Reduction (DNR) System	69
Setting On-screen Display	69
Setting the Video System	70
Saving Projected Images	71
Capturing the Image	71
Deleting the Captured Image	71
Setting a Background Image	72
Selecting a Startup Image	72
Selecting the Economy Mode	73
Setting the Power Save Mode	73
Monitor Out/RS-232C Off Function	73
Auto Power Off Function	74
Displaying the Remaining Lamp Life (Percentage)	74
Reversing/Inverting Projected Images	75
Locking the Operation Buttons on the Projector	75
Setting up the Keylock	75
Canceling the Keylock Setting	76
Selecting the Transmission Speed (RS-232C)	76
Setting up a Password	77
Entering the Password	77
Changing the Password	78
If You Forget Your Password	78
Setting the Anti-Theft	79
Entering the Keycode	79
Changing the Keycode	80
Initializing the Settings	81
Displaying the Adjustment Settings	82
Appendix	83
Maintenance	84
Replacing the Air Filter	85
Maintenance Indicators	87
Regarding the Lamp	89
Lamp	89
Caution Concerning the Lamp	89
Replacing the Lamp	89
Removing and Installing the Lamp Unit	90
Resetting the Lamp Timer	91
Connecting Pin Assignments	92
(RS-232C) Specifications and Command Settings	93
Wired Remote Control Terminal Specifications	96
Computer Compatibility Chart	97
Troubleshooting	98
For SHARP Assistance	100
Specifications	101
Dimensions	102
Glossary	103

Match case Limit results 1 per page

-84

Maintenance Indicators

Info

•

If the temperature warning indicator illuminates, and the projector enters the standby mode, follow the pos-

sible solutions on the previous page and then wait until the projector has cooled down completely before

plugging in the power cord and

turning the power back on. (At least 5 minutes.)

•

If the power is turned off for a brief moment due to power outage or some other cause while using the

projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and

the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the

AC outlet and then turn the power on again.

•

If you want to clean the air vents during projector operation, be sure to put the projector into the standby

mode. After the cooling fan has stopped, clean the vents.

•

Do not unplug the power cord after the projector has entered the standby mode and while the cooling fan is

running. The cooling fan runs for about 90 seconds.