Sharp XG-C55X XG-C55X Operation Manual - Page 92
Connecting Pin Assignments
UPC - 074000364219
View all Sharp XG-C55X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connecting Pin Assignments INPUT 1/2 RGB and OUTPUT Signal Terminal: 15-pin Mini D-sub female connector RGB Input 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Reserve input 1 5. Not connected 5 1 6. Earth (red) 10 6 7. Earth (green/sync on green) 15 11 8. Earth (blue) 9. Not connected 10. GND 11. GND 12. Bi-directional data 13. Horizontal sync (Composite sync) 14. Vertical sync signal 15. Data clock RS-232C Terminal: 9-pin Mini DIN female connector 8 Pin No. 1 Signal Name 9 7 2 RD Receive Data 3 SD Send Data 4 5 SG Signal Ground 6 3 6 7 RS 8 CS 9 I/O Output Input Output Input Input Output Input Output 5 4 Component Input 1. PR (CR) 2. Y 3. PB (CB) 4. Not connected 5. Not connected 6. Earth (PR) 7. Earth (Y) 8. Earth (PB) 9. Not connected 10. Not connected 11. Not connected 12. Not connected 13. Not connected 14. Not connected 15. Not connected Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to Pin 8 Connected to Pin 7 Not connected 2 1 1 5 69 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG RS CS CI Name Receive Data Send Data Signal Ground I/O Input Output Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to internal circuit Connected to internal circuit Not connected Note • Pin 8(CS) and Pin 7(RS) are short circuited inside the projector. RS-232C Cable recommended connection: 9-pin D-sub female connector 5 1 96 Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. PC). Projector Pin No. 4 5 6 PC Pin No. 4 5 6 -88