Sharp XG-C55X XG-C55X Operation Manual - Page 61
Displaying Dual Pictures (Pict in Pict), Pict in Pict
UPC - 074000364219
View all Sharp XG-C55X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture from INPUT 1 or 2. Displaying the Inset Picture 1 Press . 2 Press or on the remote control or on the projector to switch the image in the inset picture . 3 Press ', ", \ and | to set the position of the inset picture. • Press to stop the frame from moving or to make the frame disappear. 4 Press to move the inset pic- ture. • The inset picture will be moved to the inset picture frame. Note • The inset picture can only be displayed with composite video (NTSC/PAL/ SECAM) or S-Video signal. • The Freeze function works only with the inset picture, when the Pict in Pict mode is in operation. When the signal entered into INPUT 1 or 2 is as follows, Pict in Pict does not work: • With a resolution that exceeds SXGA. • When the input signal is 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I. • When the input signal has changed to the Interlace mode using RGB signals. • When the picture display mode is set to "DOT BY DOT". • When no signals are sent to INPUT 1 or 2, or when the resolution or refresh rate (vertical frequency) is changed. UNDO button ENTER button ', ", \, | buttons PinP button INPUT 3/4 buttons Easy to Use Functions -57