Singer 9985 Quantum Stylist TOUCH Instruction Manual - Page 20
Machine Control, Functions
View all Singer 9985 Quantum Stylist TOUCH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
MACHINE CONTROL FUNCTIONS A. START/STOP BUTTON The machine will start running when start/stop button is pressed and will stop when pressed the second time. The machine will rotate slowly at start of sewing. Note: When the foot controller is connected, start/stop button will be deactivated. MONITOR LAMP Green Light "ON" Ready to sew or wind a bobbin. Red Light "ON" Presser foot is not in down position or buttonhole lever is not lowered. If the red light is on, the machine will not start even when start/stop button is pressed. If the upper thread is not threaded, the machine will stop. (Upper thread sensor) B. REVERSE STITCH BUTTON The machine will continue to sew in reverse at low speed while this button is pressed and stop when this button is released. Note: When the foot controller is connected, machine will sew in reverse while this button is pressed. When released, machine will sew forward. C. NEEDLE UP-DOWN / SLOW BUTTON Pressing this button when the machine is stopped, will change the needle position from down to up or from up to down. While sewing, by pressing this button, machine will sew in slow speed. Pressing this button again, the speed will return. D. SPEED CONTROL LEVER The machine will sew faster when the lever is slid to the right, and sew slower when the lever is slid to the left. Note: When the foot controller is connected, this button limits the maximum speed. E. PRESSER FOOT LIFTER The presser foot is raised or lowered by this lever. Note: Machine will not start when the presser foot is raised. (Except or bobbin winding) 20