Sony CAV-M1000ES Setup Software Operating Instructions - Page 5
Save IR To File
![]() |
View all Sony CAV-M1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
(# Now that the CAV-M1000ES settings have been loaded into the Setup Application and saved, you can start making any necessary changes. Two types of sources can be used with the CAV-M1000ES. "Input Source" refers to equipment such as DVD players that feed signals into the CAV-M1000ES. "Common Source" refers to equipment such as projectors that do not feed the CAV-M1000ES but can be operated by the RM-TP100 RF remote control. M1000ES. These commands form separate Source IR files that use the file extension "MSE." Once learned, these MSE files can be saved as a separate PC file for use with other CAV-M1000ES main units. Sony will also post MSE files on our CAV-M1000ES support website for easy downloading and exchange. a. To load input source infrared remote commands from a saved PC file, click the Load IR From File button. b. To save the current IR commands to a PC file, click the Save IR To File button and supply a name for the file you wish to save. c. To clear input source infrared commands from the current configuration, click the Clear IR File button. $ Repeat the above steps for every input source that needs to be configured by going through the remaining Source tabs. You can configure up to 8 unique input sources. Start by configuring the "Input Sources." ! From the main screen, click on the Input Source Selection tab on the top. " Select the Source 1 sub-tab. # Configure the Source 1 device by specifying: • Alias Input Name: Enter the source name that will be displayed on the in-wall keypads for selecting the Source 1 device. Alias input names can be up to seven characters long. These names will appear in the LCDs of the RMR-K100 keypads. • Product: Select the type of device. • Manufacturer: Select the maker. • Main STR Function: A Sony ES Series receiver is connected to the CAV-M1000ES via RS232. This drop down enables you to configure the input source that the receiver will automatically select when Source 1 is selected on the RM-TP100 remote. • Load IR From File: Input Source infrared (IR) remote commands that are not preprogrammed can be "learned" by the CAV-M1000ES using the handheld IR remote control of the input source equipment and the front panel of the Next, configure the "Common Sources" by following similar steps. ! Click on the Common Source Selection tab on the top. " Select the Common 1 sub-tab. # Configure the Common 1 device by specifying: • Product: Select the type of device. • Manufacturer: Select the maker. • Load IR From File: Common Source infrared (IR) remote commands that are not preprogrammed can be "learned" by the CAV-M1000ES using the handheld IR remote control of the common source equipment and the front panel of the +
![](/manual_guide/products/sony-cavm1000es-setup-software-operating-instructions-e487304/5.png)