Sony CCD-FX511 Primary User Manual - Page 58
momentarily
View all Sony CCD-FX511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Editing Editing a tape 1 Insert a tape to be recorded on into the recording VCR. 2 Slide the EDIT switch on the camcorder in the direction of the arrow shown below. n EDITA. o 0, 3 Set the POWER switch on the camcorder to VTR, and then insert the recorded tape into it. 4 Play back a tape on the camcorder until you locate the point where you want to start editing, and then set the camcorder to the playback pause mode. 5 On the recording VCR, locate the recording starting point and set the VCR to the Recording Pause mode. 6 Press II PAUSE on the camcorder and VCR simultaneously to start editing. Editing more scenes Repeat steps 4 to 6. To stop editing momentarily PressII (PAUSE) on the recording VCR. To stop editing Press = (STOP) on both VCRs. If you use the DATA SCREEN function The indicators displayed on the TV screen will also be recorded. Use of the EDIT switch When you set EDIT in the direction of the arrow (EDIT ON). you can minimize the picture deterioration that results from editing. Avoid using the edited tape for multiple generations of editing. After editing, be sure to set this switch in the opposite direction of the arrow (EDIT OFF). 58 Advanced Camera Operation