Sony CPD-M151 Operating Instructions (primary manual) - Page 8

Step 3, Attaching the rear cover, Using the monitor without the stand, the cover. - driver

Page 8 highlights

Getting Started Step 3: Attaching the rear cover After connecting the computer and power cord, attach the supplied rear cover. Make sure that you keep the screen upright when attaching or detaching the rear cover. 1 Clamp the AC adapter cord. Align the marking tape of the AC adapter cord to the clamp, wind it once and close the clamp. 3 Turn the screw to fasten the rear cover. Clamp Marking tape of the AC adapter cord 2 Press the rear cover against the part for attaching the cover. Unlocked Locked Using the monitor without the stand Prepare: Philip's screw driver Soft cloth to place under the LCD panel 1 Remove the screws from the fixing shaft of the stand. 2 Place the monitor on the soft cloth with the LCD panel facing down, and pull the stand out from the monitor. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

8
Getting Started
Step 3:
Attaching the rear cover
After connecting the computer and power cord, attach the
supplied rear cover.
Make sure that you keep the screen upright when attaching
or detaching the rear cover.
1
Clamp the AC adapter cord.
2
Press the rear cover against the part for attaching
the cover.
Unlocked
Locked
Align the marking tape of the
AC adapter cord to the clamp,
wind it once and close the
clamp.
Clamp
Marking tape of the
AC adapter cord
3
Turn the screw to fasten the rear cover.
Using the monitor without the stand
Prepare:
Philip’s screw driver
Soft cloth to place under the LCD panel
1
Remove the screws from the fixing shaft of the stand.
2
Place the monitor on the soft cloth with the LCD
panel facing down, and pull the stand out from the
monitor.