Sony DCR-HC42 Operating Guide - Page 11
the AC Adaptor, Handycam Station - battery discharge
UPC - 027242669758
View all Sony DCR-HC42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started 6 The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. Disconnect the AC Adaptor from the DC IN jack holding both the Handycam Station and the DC plug. To remove your camcorder from the Handycam Station Turn off the power, then remove the camcorder from the Handycam Station holding both your camcorder and the Handycam Station. To charge the battery pack using only the AC Adaptor Turn off the power, then connect the AC Adaptor to the DC IN jack on your camcorder. • You can operate your camcorder connected to a power source such as a wall outlet as shown in the illustration. The battery pack will not lose its charge in this case. To remove the battery pack Turn off the power, then slide the battery pack in the direction of the arrow while pressing the PUSH button. PUSH button POWER switch DC IN jack With the mark facing down To the wall outlet AC Adaptor When storing the battery pack Fully discharge the battery before storing it for an extended period (p. 110). Continued 11