Sony DCR-HC42 Operating Guide - Page 55
USB-PLY/EDT USB-Play/Edit, DISP GUIDE, DATA CODE, REMAINING, REMOTE CTRL Remote control - usb cable
UPC - 027242669758
View all Sony DCR-HC42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
USB-PLY/EDT (USB-Play/Edit) Select this when you view pictures stored in your camcorder on your computer (p. 70), or when you connect your camcorder to a PictBridge compliant printer via a USB cable (supplied) (p. 67). STD-USB Displays pictures saved on the "Memory Stick Duo." PictBridge See page 67. USB STREAM Displays pictures saved on the tape. DISP GUIDE See page 16. DATA CODE Displays information recorded automatically (data code) during recording. OFF Data code is not displayed. DATE/TIME Displays the date and time. CAMERA DATA (below) Displays camera setting data. This cannot be selected during Easy Handycam operation. 6 0 min 1 0 : 0 0 : 0 0 : 0 0 2 6 5 AUTO 100 AWB F1. 8 9 dB 3 4 SteadyShot off* Exposure* White balance* Gain* Shutter speed Aperture value * Appears only during tape playback. • Camera setting data does not appear when movies on a "Memory Stick Duo" are played back. • The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a "Memory Stick Duo" are played back. • appears for a picture recorded using a flash (optional). • In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock and [--:--:--] will appear. REMAINING AUTO Displays the remaining tape indicator for about 8 seconds in situations such as those described below. • When you set the POWER switch to PLAY/ EDIT or CAMERA-TAPE with a cassette inserted. • When you touch (Play/Pause). ON Always displays the remaining tape indicator. REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the Remote Commander (p. 32). • Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit. • The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. REC LAMP (Recording lamp) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) Continued 55 Using the Menu