Sony DCRPC55 Operating Guide - Page 11
To charge the battery pack using only, the AC Adaptor, Getting Started
UPC - 027242669697
View all Sony DCRPC55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started 7 Install the camcorder onto the Handycam Station. Open the interface connector cover. Place the camcorder on the Handycam Station properly aligned as shown in the illustration and gently push down at the point indicated by the arrow to fully install. CHG (charge) lamp The CHG (charge) lamp lights up and charging starts.The CHG (charge) lamp turns off when the battery is fully charged. To charge the battery pack using only the AC Adaptor Turn off the power, then connect the AC Adaptor to the DC IN jack on your camcorder. • You can operate your camcorder connected to a power source such as a wall outlet as shown in the illustration. The battery pack will not lose its charge in this case. DC IN jack DC plug POWER Switch Power cord To the wall outlet AC Adaptor Continued 11