Sony DSC-T110 Cyber-shot® Handbook - Page 34

Table of contents Operation Search MENU/Settings Search Underwater Sweep Panorama (DSC-T110 only) When the camera is installed in a housing (such as the Marine Pack), the camera takes multiple shots during a sweep, and allows you to create a panoramic image from composite images. 1 Lower the lens cover to switch to shooting mode. 2 t (Settings) t (Main Settings) t [Housing] t [On] 3 Put the camera in the housing. 4 (REC Mode) t (Underwater Sweep Panorama) 5 Align the camera with the end of the subject to be shot and press the shutter button. 6 Pan the camera to the end of the guide, following the indication on the LCD screen. Guidance bar This part will not be taken Notes • If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the composite image. If this happens, move the camera faster to record a full panoramic image. • Since several images are stitched together, the stitched part will not be recorded smoothly. • Under low light conditions, panoramic images may be blurred or the shooting may not be successful. • Under lights that flicker, the brightness or color of the combined image will not always be the same. • When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked angle and shoot again. • Underwater Sweep Panorama is not suitable for the following situations: - When objects are too close to the camera - Images with little contrast - Images with constant change • You cannot create panoramic images in the following situations: - You pan the camera too quickly or too slowly. - There is too much camera shake. Index 34GB