Sony DVP-NW50 User Manual - Page 46
Test Tone.
![]() |
View all Sony DVP-NW50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Settings for Speakers (DVP-NW50 only) (continued) Adjusting the speaker volume - TEST TONE The speakers will emit a test tone. Use the remote while seated in your listening position to adjust the volume of each speaker. The default setting is underlined. Test Tone OFF ON Function The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while you are adjusting the level. However, when the speaker sizes set to "NONE," the speakers do not emit the test tone. 1 Press the "V" SELECT on the Home Menu, then press the "SETUP" SELECT. The Setup Menu appears. Setting the dynamic range compressor You can compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. The default setting is underlined. DRC OFF STD MAX Function Reproduces the sound track with no compression. Reproduces the sound track with the dynamic range intended by the recording engineer. Provides dramatic compression of the dynamic range. 1 Press the "V" SELECT on the Home Menu, then press "SETUP" SELECT. The Setup Menu appears. Chapter 8 Other Functions 2 Press the "TEST TONE" SELECT to activate the TEST TONE. "ON" and "OFF" are toggled as you press "TEST TONE" SELECT. You will hear the test tone from each speaker for two seconds each in sequence as follows. Front speaker (L) t Center speaker t Front speaker (R) t Surround speaker (R) t Surround speaker (L) t Sub woofer 3 Adjust the volume level so that the volume of the test tone from each speaker sounds the same when you are in your main listening position. To adjust balance of the front right/front left speakers volume level of the center/surround/ sub woofer Use front balance parameter on the Speaker level Menu (page 45) surround balance parameter on the Speaker level Menu (page 45) 4 Press the "TEST TONE" SELECT again to turn off the TEST TONE. 2 Press the "DRC" SELECT to activate the Dynamic range compressor. 3 Press the "DRC" SELECT again to select the sound. "OFF," "STD," and "MAX" are toggled as you press the button. Note Dynamic range compression works with Dolby Digital sources only. 46US
![](/manual_guide/products/sony-cdpnw10-user-manual-479c664/46.png)