Sony DVP-NW50 User Manual - Page 51

Cannot monitor other rooms. , Monitor Privacy is set to on. Set it to off. , The volume level is low. Press +VOLUME to adjust the volume. , Other Units have been using Intercom. Wait for a while until Monitor is available. Cannot get track title while listening to music from NETWORK or MY MUSIC. , The PC application is not running. Start the PC application on your computer. Audio reception is interrupted or distorted. , The network does not have enough bandwidth. Check to see if the network cable supports 100BASE-TX or not. , The network cable, network switch, or router device may not support 100BASE-TX. Check to see if the router device supports 100BASE-TX or not. Operation The remote does not function. , The batteries in the remote are weak. , There are obstacles between the remote and the Unit. , The distance between the remote and the Unit is too far. , The remote is not pointed at the remote sensor on the Unit. , The remote code switch setting on the remote does not match the setting on the Unit. Radio stations cannot be tuned in. , Check that the antennas are connected securely. Adjust the antennas or connect an external antenna if necessary. , The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. , No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 31). The remote does not function. , There are obstacles between the remote and the Unit. , The distance between the remote and the Unit is too far. , The remote is not pointed at the remote sensor on the Unit. , The batteries in the remote are weak. The disc does not play. , There is no disc inserted. , The disc is upside down. Insert the disc with the playback side facing the Unit. , The disc is skewed. , The Unit cannot play certain discs (page 8). , The region code on the DVD does not match the Unit. , Moisture has condensed inside the Unit. Remove the disc and leave the Unit turned on for about half an hour. The MP3 audio track cannot be played. , The DATA CD is not recorded in an MP3 format that conforms to ISO 9660 Level 1/Level 2 or Joliet. , The MP3 audio track does not have the extension ".MP3." , The data is not formatted in MP3 even though it has the extension ".MP3." , The Unit can only play MP3 (MPEG1 Audio Layer3) audio. , The Unit cannot play audio tracks in MP3PRO format. The disc does not start playing from the beginning. , Shuffle Play, or Repeat Play has been selected (page 21, 23, 24). Cancel Shuffle Play, or Repeat Play (page 21, 23, 24). , Resume Play has been selected. During stop, press x on the remote and then start playback (page 22, 23). , The title, DVD or PBC menu automatically appears on the TV screen. Playback stops automatically. , Some discs may contain an auto pause signal. While playing such a disc, the Unit stops playback at the auto pause signal. The Unit turns off during DVD playback. , The Sleep Timer turned off the Unit at the preset time (page 41). Some functions such as Stop, Search, Repeat Play, or Shuffle Play cannot be performed. , Depending on the disc, you may not be able to perform some of the operations above. See the operating manual that came with the disc. Continue to the next page l 51US Chapter 9 Other Information