Sony HDR HC3 Operating Guide - Page 57
Digital Zoom, Steadyshot, Conv.lens, Dial Set, Using The Menu, Wide Conv., Focus, Exposure, Ae Shift - reset
UPC - 086753091267
View all Sony HDR HC3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using the Menu To cancel the count down, touch [RESET]. To cancel the self-timer, select [OFF]. • You can also operate by pressing START/STOP or PHOTO on the Remote Commander (p. 40). DIGITAL ZOOM You can select the maximum zoom level in case you want to zoom to a level greater than 10 × (the default setting) while recording on a tape. Note that the image quality decreases when you are using the digital zoom. The right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level. B OFF Up to 10 × zoom is performed optically. 20 × Up to 10 × zoom is performed optically, and after that, up to 20 × zoom is performed digitally. 80 × Up to 10 × zoom is performed optically, and after that, up to 80 × zoom is performed digitally. STEADYSHOT You can compensate for camera shake (the default setting is [ON]). Set [STEADYSHOT] to [OFF] ( ) when using a tripod (optional), then the image becomes natural. CONV.LENS When using an optional conversion lens, use this function to record using the optimum compensation for camera shake for each lens. B OFF Select this when the conversion lens (optional) is not used. WIDE CONV. ( ) Select this to use the wide conversion lens (optional). TELE CONV. ( ) Select this to use the tele conversion lens (optional). DIAL SET You can assign an item you want to set to the CAM CTRL dial and adjust it manually using the CAM CTRL dial. B FOCUS Assigns the [FOCUS] (p. 54) setting to the CAM CTRL dial. EXPOSURE Assigns the [EXPOSURE] (p. 53) setting to the CAM CTRL dial. AE SHIFT Assigns the [AE SHIFT] (p. 54) setting to the CAM CTRL dial. WB SHIFT Assigns the [WB SHIFT] (p. 54) setting to the CAM CTRL dial. • See page 72 for details on the CAM CTRL dial. 57