Sony HDR HC3 Operating Guide - Page 68
I.link Conv, Tv Type, Disp Guide, Status Check, Guideframe, Data Code, Standard Set Menu Continued - hdmi output
UPC - 086753091267
View all Sony HDR HC3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
STANDARD SET menu (Continued) i.LINK CONV Signals in HDV format are converted to DV format, and pictures are output in DV format from the HDV/DV Interface (i.LINK). B OFF Outputs the pictures from the HDV/DV Interface (i.LINK) in accordance with the settings in [REC FORMAT] and [VCR HDV/DV]. ON (HDV t DV) Pictures in HDV format are converted to DV format, and pictures in DV format are output in DV format. • For input signal via an i.LINK connection, see [VCR HDV/DV] (p. 65). • Disconnect the i.LINK cable before setting [i.LINK CONV]. Otherwise, the connected video device may not be able to recognize the video signal from your camcorder. TV TYPE You need to convert the signal depending on the TV connected when playing back the picture. The recorded pictures are played back as following illustrations. B 16:9 Select to view your pictures on a 16:9 (wide) TV. HDV/DV (16:9) format pictures DV (4:3) format pictures 68 4:3 Select to view your pictures on a 4:3 standard TV. HDV/DV (16:9) format pictures DV (4:3) format pictures • When you connect your camcorder to a TV compatible with the ID-1 system, or via an S VIDEO jack, and play back the tape, set [TV TYPE] to [16:9]. The TV automatically switches the aspect ratio according to the playback picture. Refer also to the manual supplied with your TV. DISP GUIDE See page 21. STATUS CHECK You can check the setup value of the following items. - [COMPONENT] (p. 67) - [i.LINK CONV] (p. 68) - [TV TYPE] (p. 68) - HDMI OUTPUT (p. 83) - [VCR HDV/DV] (when the POWER switch is set to PLAY/EDIT) (p. 65) GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/ BATT INFO to make the frame disappear. • Pointing the subject at the cross point of the guide frame makes a balanced composition. DATA CODE During playback, displays the information (data code) recorded automatically at the time of recording.