Sony HXCU-FB80 Operating Instructions - Page 16

Status Display Camera settings Page 1 a b cd The CCU system status can be monitored using a picture monitor connected to the PIX output. 6dB 1/2000 OFF For details about checking and changing settings, see "Setup Menu" (page 19). Displaying the Status Screen The status screen is controlled using the knob and levers in the MENU control block on the front panel. DISP/MENU lever and indicator MENU DISP CANCEL MENU ENTER CONTROL CONTROL knob To display the status screen Set the DISP/MENU lever to the DISP position. The most recently viewed status screen page is displayed (when first powered on, the camera settings page is displayed). Turning the CONTROL knob changes the displayed page. To exit the status screen display In status screen display mode, set the DISP/MENU lever to the DISP position. Status Display Screen The following information is displayed on the status display screen. • Camera settings • System status • CCU hardware diagnostics • Camera system diagnostics • Network diagnostics • CCU AT board diagnostics • CCU DPR board diagnostics • Front panel diagnostics • Camera hardware diagnostics • ROM version information for major components ND:1 F:4.7 EX CC:A e fg h a Gain value indicator Displays the video output signal gain (dB units). Becomes the AGC indicator when AGC is on. b Shutter speed/Clear scan frequency indicator Displays the shutter speed. When ECS is on, the clear scan frequency is displayed. At slow shutter speeds, the number of frames is displayed. In auto shutter mode, AE (Auto Exposure) is displayed. c Shutter/ECS/Slow shutter on/off indicator Displays the shutter/ECS/slow shutter on/off state. d Camera auto control information area Top: Displays the Auto Setup category and execution status. Bottom: Displays the execution item. e ND filter indicator Displays the current ND filter selection. f F-stop value indicator Displays the lens F-stop value (iris value). g EX (lens extender) indicator Displayed when the lens extender is in use. Notes • Items that are turned off using the page settings of the CCU CONFIGURATION menu are not displayed. • A "-" mark is displayed for each item when a camera is not connected. h CC filter indicator Displays the current CC filter selection. Page 2 6dB 1/2000 White R: 0 G: 0 B: 0 BLK γ : 0 DTL : 0 ND:1 F:4.7 EX OFF Black R: 0 G: 0 B: 0 M:0.0 Flare R: 0 G: 0 B: 0 White: White balance R/G/B value Black: Black balance R/G/B/Master value BLK γ: Black gamma value 16