Sony HXCU-FB80 Operating Instructions - Page 29

CCU CONFIGURATION Page name Page No. C07 Item INCOM MIC Settings (MIC ON), (MIC OFF), (PGM ON) (PROD), (ENG) CARBON, ECM, DYNAMIC MIC TYPE BALANCE, UNBALANCE MIC GAIN SIDE TONE PGM MIX -6dB, 0dB, +6dB 0 to 99 50 OFF, INCOM+PGM, L-INCOM/R-PGM C08 C09 C10 PGM SEL PGM LEVEL TRUNK IF OFF, PGM, MIC1, MIC2, MIC1+MIC2 0 to 99 50 232C, 422A, ---- HD PROMPTER FRAME SYNC HD TRUNK SUB CMD ENABLE, DISABLE ON, OFF (ENABLE), (DISABLE) OFF, TRUNK IF, -------- SETUP ON, OFF, -- Q FILTER VBS LEVEL CHROMA PIX LEVEL CHROMA NARROW, WIDE, -- -99 to 99 0 -99 to 99 0 -99 to 99 0 -99 to 99 0 Description CCU front panel MIC/PGM switch position (display only) CCU front panel INTERCOM switch position (display only) Headset microphone type connected to INTERCOM on the front panel CARBON: Carbon microphone (power supply, 20 dB gain) ECM: Electret condenser microphone (power supply, 40 dB gain) DYNAMIC: Dynamic microphone (no power supply, 60 dB gain) Headset microphone type connected to INTERCOM on the front panel BALANCE: Balanced microphone UNBALANCE: Unbalanced microphone Input gain setting Side tone level settings OFF: Signals are not mixed. INCOM+PGM: INCOM and PGM signals are mixed. L-INCOM/R-PGM: Outputs INCOM signal through the left channel and a PGM signal through the right PGM output settings PGM level settings Communications circuit mode setting ----: Displayed when SUB CMD item is set to TRUNK IF (not configurable) Displays HD teleprompter enable/disable Frame synchronizer function on/off setting Displays HD trunk enable/disable --------: Displayed when SUB CMD is disabled (not configurable) ON: With VBS setup OFF: Without setup --: Displayed when format is PAL (display only) Q FILTER bandwidth setting --: Displayed when format is PAL (display only) VBS output settings VBS output level settings Chroma settings for VBS output PIX output settings PIX output level settings Chroma settings for PIX output 29