Sony HXCU-FB80 Operating Instructions - Page 28

CCU CONFIGURATION Page name Page No. C04 C05 C06 Item LEVEL GATE Y LEVEL1 Y LEVEL2 GATE MARKER MODULATION MARKER CAM MIC GAIN CH1 CH2 AUDIO OUTPUT CH1 LEVEL CH2 LEVEL CAMERA SYSTEM I/F CANCEL LVL TERMINATION PGM INPUT Settings Description ---, 1&2, 1, 2, OFF 0 to 108% 49 61 -99 to 99 -25 0 to 108% 74 108 -99 to 99 -25 ---, ON, OFF -99 to 99 0 ---, ON, OFF -99 to 99 0 ON, OFF 4:3, 13:9, 14:9, EU VISTA, VISTA, CINEMA, FOLLOW DC ---, 20, 30, 40, 50, 60 dB ---, 20, 30, 40, 50, 60 dB -20, 0, +4 dBu -20, 0, +4 dBu (ENG/MIC ON), (PROD/MIC ON), (----/MIC OFF) 4WIRE, RTS, CLEAR COM -99 to 99 0 (OFF), ON, OFF -20, 0, +4 dBu 1&2: Displays level gate 1 and 2 1: Displays level gate 1 2: Displays level gate 2 ---: Displayed when camera not connected, video output not set to CAMERA, or video output is set to CAMERA and GATE MARKER is ON (display only) Level gate 1 minimum and maximum detection levels settings Zebra level added to detection area Level gate 2 minimum and maximum detection levels settings Zebra level added to detection area Gate signal display on/off settings ---: Displayed when camera not connected (display only) Gate signal level settings 4:3 aspect ratio mask function on/off settings when EDGE CROP is ON ---: Displayed when camera not connected (display only) Mask video level settings Marker signal on/off settings Superimposed marker signal selection Microphone gain settings Settings vary depending on microphones ---: Displayed when camera not connected (display only) Audio output level settings CH1 output level settings CH2 output level settings Intercom interface (D-sub 25-pin) settings Side tone cancellation level setting Connects to a 200 Ω terminator, if ON is selected while 2-wire intercom interface (RTS or CLEAR COM) is used (OFF): Displayed when 4WIRE is selected in SYSTEM I/F (display only) PGM input level settings 28