Sony HXCU-FB80 Operating Instructions - Page 17

Flare: Flare balance R/G/B value DTL: Detail level Note The items are the same as those on "Page 1" (page 16) in the "Camera settings" section. System status *System Status 1/2* HXC-FB80 1080/59.94P (OETF : HLG_LIVE) Reference:Free Lock SLOT1-1&2:1080/59.94I SLOT1-3&4:1080/59.94I SLOT2-1&2:4K/59.95P 2SI (OETF : HLG_LIVE) SLOT2-3&4:4K/59.95P 2SI (OETF : SDR) *System Status 2/2* HXC-FB80 1080/59.94I (OETF : HLG_LIVE) Return-1 :SDI-1(HD) Return-2 :SDI-2(SD) Return-3 :VBS-1 Return-4 :FBS-2 The camera model name, format, and camera OETF (HLG_LIVE or SDR) are displayed at the top of the page when a camera is connected to the unit. A "---" mark is displayed when a camera is not connected. Reference: Reference signal format and lock status SLOT1-1&2: SLOT1 SDI OUTPUT 1/2 connector output format selection SLOT1-3&4: SLOT1 SDI OUTPUT 3/4 connector output format selection SLOT2-1&2: SLOT2 SDI OUTPUT 1/2 connector output format selection and connected camera OETF (HLG_LIVE or SDR) indicator SLOT2-3&4: SLOT2 SDI OUTPUT 3/4 connector output format selection and connected camera OETF (HLG_LIVE or SDR) indicator Return-1: Return channel setting of Return 1 Return-2: Return channel setting of Return 2 Return-3: Return channel setting of Return 3 Return-4: Return channel setting of Return 4 CCU hardware diagnostics *Diagnosis* 3/14 DPR :OK AT :OK Front Panel : OK The camera Auto Setup category, and the corresponding setup item and status are displayed at the top of the page. DPR: DPR board status AT: AT board status Front Panel: Front panel status Camera system diagnostics Page 1 *System Diag 1/3* Optical Condition CAMERA OK CCU OK Fan Power OK Timer 0H CCU Power OK SerialNo 00000000 4/14 CAMERA: Camera light sensor status CCU: CCU light sensor status Fan Power: CCU power supply fan status Timer: Elapsed time since power-on CCU Power: CCU power supply status SerialNo: CCU serial number Page 2 *System Diag 2/3* 5/14 CAMERA REMOTE Cable Connect Data OK Power OK Cable Connect Data OK Power OK CAM:ssxxxxxxb Green CCU:ssxxxxxxb Green CAMERA Cable: Camera cable connection status CAMERA Data: Camera data transmission status CAMERA Power: Camera power supply status REMOTE Cable: Remote device cable connection status REMOTE Data: Remote device data transmission status REMOTE Power: Remote device power supply status CAM/CCU (light sensor level indicator): CAM displays camera light sensor level, and CCU displays CCU light sensor level. Page 3 *System Diag 3/3* 6/14 Intercom CCU FRONT ENG PGM ON CAMERA ENG MIC ON CAM MIC Gain CH1(FRONT) 60dB CH2(REAR) 60dB SUB CMD -------- Intercom CCU FRONT: CCU intercom selection Intercom CAMERA: Camera intercom channel selection and microphone status CAM MIC Gain CH1 (FRONT): Amplifier gain for a microphone connected to the camera AUDIO 1 IN connector. 17