Sony HXCU-FB80 Operating Instructions - Page 19

Camera hardware diagnostics *CAMERA Diag* 13/14 ALL BOARD OK Displays the camera hardware status. ROM version information *ROM Version* 14/14 CAMERA HXC-FB80 1.00 XX.XX.XX CCU HXCU-FB80 1.00 XX.XX.XX CAMERA: Camera model name and ROM version CCU: CCU model name and ROM version Setup Menu The CCU system and peripheral settings can be checked and modified using a picture monitor connected to the PIX output. Changing Menu Item Settings The menu screen is controlled using the knob and levers in the MENU control block on the front panel. Setting the CANCEL/ENTER lever to the ENTER position and pressing the CONTROL knob perform the same function. DISP/MENU (display/menu) lever and indicator CANCEL/ENTER lever MENU DISP CANCEL MENU ENTER CONTROL CONTROL knob To display a menu page Set the DISP/MENU lever to the MENU position. When first powered on, the CCU MENU page is displayed. To display the CCU MENU page In menu display mode, turn the CONTROL knob to move the pointer (,) to TOP in the upper right corner of the menu page, then press the CONTROL knob. The CCU MENU showing the menu configuration is displayed. ** CCU MENU ** cSYSTEM OPERATION CCU CONFIGURATION NETWORK SETTINGS Menu name SYSTEM OPERATION CCU CONFIGURATION NETWORK SETTINGS Description Input/output signal format and system-related settings CCU configuration settings Network-related settings To select an item in the CCU MENU Turn the CONTROL knob to move the pointer (,) up/down to the desired menu item, then press the CONTROL knob. The most recently viewed page in the selected menu is displayed. 19