Sony ICD-BP150 Operating Instructions (primary manual) - Page 19

Basic Operations Searching forward/backward during playback (Cue/Review) To search forward, keep > pressed during playback and release the button at the point you wish to resume playback. To search backward, keep . pressed during playback and release the button at the point you wish to resume playback. The unit searches at slow speed (unit of 4 seconds) with playback sound. It is useful when checking one word forward or behind. If you keep > or .pressed, the unit starts searching at higher speed. Between messages the unit pauses for 2 seconds. During cue/review, the counter will be displayed, regardless of the display mode setting (page 39). You can cue or review during playback pause. The unit goes back into playback pause at the point you release > or .. 1 Tip When fast playback is done to the end of the last message, "END" flashes for 5 seconds and the OPR indicator lights up in green. (You cannot hear the playback sound.) If you keep . pressed while "END" is flashing, the messages are played back rapidly, and normal playback will start at the point you release the button. When "END" stops flashing and the OPR indicator goes off, the unit will stop at the beginning of the last message. If the last message is long and you wish to start playback at a later part of the message, keep > pressed to play back the message to the end and then press . while "END" is flashing to go back to the desired point . (For messages other than the last one, go to the beginning of the next message and play backward to the desired point.) Locating quickly the point you wish to start playback (Easy Search) When EASY-S is set to ON (page 41), you can quickly locate the point you wish to start playback by pressing > or . repeatedly during playback or playback pause. You can go back approx. 3 seconds by pressing . once, or advance approx 10 seconds by pressing > once. This function is useful when locating a desired point in a long recording. 19GB