Sony ICD-BP150 Operating Instructions (primary manual) - Page 60

Troubleshooting (continued) Error messages IC Recorder Error message Cause/Remedy "PRE SET" "BACK-D" "NO ERASE" "NO DATA" "SET DATE" "ID FULL" "FULL" "ACCESS" •You set the alarm to play back a message or set the timer to start recording at a date and time previously set on another message. Change the alarm or timer recording setting. •You set the alarm or time recording when the time is already past. Check it and set the appropriate date and time. •You cannot erase an index to combine messages of different modes. •The selected folder does not have any messages. You cannot set the alarm, etc. because of this. •If you do not set date and time, you cannot make alarm or time recording setting. To set date and time, see page 10. •When there are already 99 messages in the selected folder or the remaining memory of the IC recorder is short, you cannot add an index. Erase some messages before adding an index. •The remaining memory of the IC recorder is too short. Erase some messages before recording. •You inserted the batteries or disconnected the USB cable. Wait until the message disappears before starting operation. For the error messages of the "Digital Voice Editor", please refer to the online Help files. 60GB