Sony ICD-BP150 Operating Instructions (primary manual) - Page 34

Starting Recording at a Desired Time, Timer Recording continued

Page 34 highlights

Starting Recording at a Desired Time - Timer Recording (continued) To stop the timer recording Press xSTOP. To change the timer setting Press . or > in Step 2, 3 or 4 on page 33 to change the year, month, day or time and press NxPLAY/STOP. To cancel the timer recording setting Select "OFF" in Steps 1-3 on page 32 and press NxPLAY/STOP. Notes • You cannot set the timer to record more than one message. • When the timer recording starts, the recording mode selected in Step 5 is automatically selected. When the recording ends, the recording mode is reset to the initial setting. • Make sure that the remaining recording time is long enough for the timer recording. You cannot set the timer if the length of the timer recording exceeds the remaining recording time. However, in the case of recording once a week or everyday, you can set the timer if the remaining recording time is longer than the first recording and for the second or later recording, timer recording stops when there is no more remaining time on the IC recorder. • If 99 messages have been recorded in the selected folder or the memory is full, timer recording will not start. • If the timer is set to start recording before 23:59 and to end recording after 0:00, the recording will stop the next day. • If the timer start time comes during alarm playback, playback will stop and the timer recording starts. • When the timer recording start time comes during operation other than recording, the operation stops and the timer recording starts. When the timer recording start time comes during recording, the recording continues and the timer recording will not start. 34GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

34
GB
Starting Recording at a Desired Time
Timer Recording (continued)
To stop the timer recording
Press
x
STOP.
To change the timer setting
Press
.
or
>
in Step 2, 3 or 4 on page 33 to change the year, month,
day or time and press
Nx
PLAY/STOP.
To cancel the timer recording setting
Select
OFF
in Steps 1-
3
on page 32 and press
Nx
PLAY/STOP.
Notes
You cannot set the timer to record more than one message.
When the timer recording starts, the recording mode selected in Step 5 is
automatically selected. When the recording ends, the recording mode is reset
to the initial setting.
Make sure that the remaining recording time is long enough for the timer
recording. You cannot set the timer if the length of the timer recording exceeds
the remaining recording time. However, in the case of recording once a week
or everyday, you can set the timer if the remaining recording time is longer
than the first recording and for the second or later recording, timer recording
stops when there is no more remaining time on the IC recorder.
If 99 messages have been recorded in the selected folder or the memory is full,
timer recording will not start.
If the timer is set to start recording before 23:59 and to end recording after
0:00, the recording will stop the next day.
If the timer start time comes during alarm playback, playback will stop and
the timer recording starts.
When the timer recording start time comes during operation other than
recording, the operation stops and the timer recording starts.
When the timer recording start time comes during recording, the recording
continues and the timer recording will not start.