Sony IT-M704 Operating Instructions - Page 15
PULSE, Getting Started, Choose the dialing mode
View all Sony IT-M704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started Choose the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). When other phones (IT-M704 or IT-M804) are connected to the LINE 1 jack, the same dialing mode is automatically set to all the phones. Be sure to connect the phones beforehand, and set the dialing mode. 1 Press (PROGRAM). 2 Press b(*) or (#)B until "DIAL MODE" appears on the display. 3 Press (PROGRAM). TONE PULSE 4 Press b(*) or (#)B to choose the dialing mode ("TONE" or "PULSE"), and then press (PROGRAM). You will hear a long confirmation beep. Notes • Do not allow more than 20 seconds to elapse between each step of the procedure. • The dialing mode cannot be set for every line. If you aren't sure of your dialing system Make a trial call with the dialing mode set to "TONE". If the call connects, leave the setting as is; otherwise, set to "PULSE". continued Getting Started 15US