Sony IT-M704 Operating Instructions - Page 24
Making calls when the headset is connected, Additional tasks, SPEAKERPHONE
View all Sony IT-M704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Making calls (continued) Making calls when the headset is connected When the TL-HD1 headset (not supplied) is connected to the I (HEADSET) jack, you can talk through the headset. 1 Press (SPEAKERPHONE) (HEADSET). The SPEAKERPHONE lamp lights up. 2 Dial the phone number. 3 When you're done talking, press (SPEAKERPHONE) (HEADSET). The SPEAKERPHONE lamp goes off. I Notes • If the headset is not connected, you will make a call through the speakerphone in step 1. • If there is a line put on hold, you cannot make a call by just pressing (SPEAKERPHONE) (HEADSET) in step 1. Press a line button that is not used first, and then dial the phone number. Additional tasks To Adjust the handset or headset volume Adjust the speaker volume Put a call on hold Mute your voice Switch to tone dialing temporarily Do this During phone conversation, press (VOLUME) (+) or (--). Each press of (VOLUME)(+) or (--) switches the handset or headset volume between "HIGH", "MID" (middle) and "LOW". During speakerphone conversation, press (VOLUME)(+) or (--). Each press of (VOLUME)(+) or (--) switches the speaker volume by one of 16 levels. Press (HOLD). The line button on which a call is put on hold will flash. Press (LINE 1), (LINE 2), (LINE 3) or (LINE 4) that is flashing to resume the conversation. The corresponding line button can be pressed on every phone. Press (MUTING) to disable the microphone. The MUTING lamp lights up. Press (MUTING) again to cancel. Press TONE b(*) after you're connected. The line will remain in tone dialing until disconnected. HANDSET 24US Basics