Sony IT-M704 Operating Instructions - Page 47
Troubleshooting
View all Sony IT-M704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Troubleshooting If you've experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Making/receiving calls Symptom You hear no dial tone. The telephone does not connect at all, even though the number you dial is correct. The phone does not redial correctly. You cannot hear anything from the speaker. The phone does not ring. The line button of the unused line flashes. You hear five short error beeps when you press the line button. A click will sound from the phone after call completion or when the connection of the call has been unsuccessful. You hear five short error beeps and cannot store a number on a one-touch dial. One-touch dialing is incorrect. Remedy • Makesurethetelephonelinecordissecurely connected to the telephone outlet. • Make sure the dial mode is set correctly (page 15). • Make sure the last dialed number is really the one you want to dial. • Press (VOLUME)(+)toincreasethespeakervolume (page 24). • "RING VOLUME" set to "HIGH", "MID" or "LOW" (page 29). • Make sure the phone is not in Do Not Disturb mode (page 30). • Make sure the unused line is set to "DISABLE" (page 16). • Make sure the line is set to "DISABLE" (page 16). • Thissoundisanautomaticconfirmationofwhether or not there have been any voice messages, and not a malfunction. • Makesureyoufollowtheprocedureforstoringthe number correctly (page 31). • Makesurethenumber(includingthetoneandpause digits) does not exceed 20 digits. • Storethecorrectnumber(page31). One-touch dialing Additional Information continued Additional Information 47US