Sony KV-32XBR76 Operating Instructions - Page 71

I Appendix Troubleshooting Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed here. If the problem still cannot be solved, contact your nearest service facility. /%. ' Symptom No picture (screen not lit), no sound Possible causes and remedies • Make sure POWER is switched on. • Check the power cord connection. • Check that the TVNIDEO and VTR1-2-3 MDP controls are set correctly. • Make sure that the TV/CABLE BOX selector is set to TV. Poor or no picture (screen not lit), good sound • Adjust the picture using the VIDEO screen (pp. 42 - 45). • Check the antenna/cable connections. Good picture, no sound No color for color programs Snow and noise only • Press VOLUME + on the TV or VOL + on the Remote Commander. • Press MUTING on the Remote Commander. • Check the MTS setting (p. 49). • Check that the TVNIDEO and VTR1-2-3 MDP controls are set correctly. • Make sure SPEAKER is set to ON (p. 50). • Check the HUE and COLOR settings (pp. 42 - 43). • Check that it is an active or correct channel. • Check the cable setting. • Check the ANT/AUX button setting (KV-27XBR36/32XBR36/ 32XBR76 only). • Check antenna/cable connections. • Dotted lines or stripes , .. 4a. i This is often caused by local interference (for example, cars, neon signs and hairdryers). Adjust the telescopic aerial for minimum interference. /elk' , i•,+...- - Double images or ghosts Reflections from nearby mountains or buildings often cause this problem. Connecting a highly directional outdoor antenna or a CATV cable may improve the picture. Try another channel.It could be station trouble. OupoyseppoJi