Sony KV-32XBR96S Primary User Manual - Page 13
Making, Antenna, Connections
View all Sony KV-32XBR96S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Making Antenna Connections Although you can use either an indoor or outdoor antenna with the TV, an outdoor antenna will provide you with better picture quality. You can receive cable TV by connecting a cable supplied by your local cable company. Connecting a VHF, UHF or VHF/UHF combination antenna , or CATV cable Check your antenna cable type. If you have 75-ohm coaxial cable (round), attach an F-type connector (not supplied). If you have 300-ohm twin-lead cable (flat), attach a 300-75 ohm adaptor (not supplied). Using 75-ohm coaxial cable (round) 1Prepare the end of the cable by attaching the F-type connector as shown below. a •/I9-\7 s=i7 mm (/4 inch) 10 mm (% inch) b E (3.4.44z F-type connector 3 mm CA inch) C 17I0li i li d Hti- Using 300-ohm twin-lead cable (flat) 1 Prepare the end of the cable by attaching the 300-75 ohm adaptor as shown below. a 300-75 ohm adaptor b Loosen with a screwdriver. Attach the cable and e C fasten with a screwdriver. 2 Plug the connector into the VHF/UHF terminal at the rear of the TV. (Rear of the TV) VHF/UHF ear 2 Plug the adaptor into the VHF/UHF terminal at the rear of the TV. (Rear of the TV) VHF/UHF * Most combination antennas are equipped with a signal splitter. Remove the splitter and attach the appropriate connector. Chapter 1: SettingUp 1 13