Sony KV-32XBR96S Primary User Manual - Page 75
TvioR
View all Sony KV-32XBR96S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Operating non-Sony or Sony audio and video equipment (Learning function) Follow these instructions to `teach" any of the programmable buttons to operate the function of another Remote Commander. Use Learning in order to operate non-Sony and Sony audio equipment, and a remote controlled cable converter box or video equipment whose manufacturer code is not listed (Fig. 5, Fig. 6 - p. 73; Fig. 8 - p. 74). Remote Commander (Inner panel) Programmable buttons is co t.=POWER at• im a'"el TvioR LEARN button and Indicator lamp 1Set the VTR1-2-3 MDP selector to VTR3 or MDP. (Learning will not work in VTR1 or VTR2 settings.) VTR 1 CtirT MDP -- ) 2 Place the supplied Remote Commander head to head with equipment's remote commander, approximately 5 cm (2 inches) apart. 5 cm (2 inches) 00 c. 00 0 0 3 Press LEARN. The LEARN indicator lights up (red). LEARN • 4 Momentarily press the button of the supplied Remote Commander that you want to learn a function. The LEARNIndicatorgoes offandlights up again, anda short beep sounds, indicating that the Remote Commander is ready forlearning. The Remote Commander beeps repeatedly if an error has occurred. Repeat this step. 5 Press and hold down the button of the other remote commander, whose function you want to "teach," until the LEARN indicator turns red. A longbeep sounds and theLEARNindicatorgoes offand lights up again, indicating thatlearningis complete. Ifnot, repeatsteps 4 and5. 6 Repeat steps 4 and 5 to teach functions to other buttons. 7 Press LEARN. TheLEARNindicatorlamp lights up (red), thengoes off, indicating thatlearningIs complete. For accurate learning Do not move the remote commanders during the learning process. Notes • If the memory is full, three short beeps sound and the LEARN indicator flashes off and on. Use learning to re-program a button whose learned function you do not use often; the previously learned function is erased. • If the other remote commander's signal cannot be learned, a short beep sounds and the LEARN indicator flashes once. • If you press a button that cannot be used for learning, four short beeps sound and the LEARN indicator flashes four times. log the Programmable Remote Commander Chapter 3: Using Advanced Features 175