Sony LBT-SH2000 Operating Instructions - Page 22

Creating a party atmosphere (DJ EFFECT), Other Operations, Singing along - dj sound

Get Sony LBT-SH2000 PDF manuals and user guides View all Sony LBT-SH2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Creating a party atmosphere (DJ EFFECT) 1 Press the following button to select the effect type. • FLANGER: Create a deep flanging effect that is similar to the roar of a jet plane. • ISOLATOR: Isolate a specific frequency band by adjusting the other frequency bands. For example, when you want to focus on only vocal, etc. • SOUND FLASH: Flash the sound output. The sound cuts off periodically. • PHASER: Create a series of peaks and troughs in the frequency spectrum, like a sweeping effect. 2 Turn DJ CONTROL to adjust the effect level. To turn off the effect Press the selected effect button again. Notes • The DJ EFFECT is automatically turned off when you turn off the system, change the function or change the tuner band. • If you activate the DJ EFFECT during transferring, the sound effect will not be transferred onto the USB device. • You cannot use VOLUME/DJ CONTROL to adjust the volume when the DJ EFFECT is activated. Press VOLUME +/- on the remote control to adjust the volume. 22US Other Operations Singing along You can sing along with any audio source that played back on this system. 1 Turn MIC LEVEL to MIN to reduce the microphone volume level. 2 Connect a microphone to the MIC jack on the unit. 3 Start playing the music and adjust the volume. 4 Turn MIC LEVEL to adjust the microphone volume. If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone. After you have finished, disconnect the microphone. Note During transferring, the sound from microphone will not be transferred onto the USB device. Changing the lighting pattern on the speakers 1 Press OPTIONS. 2 Press / repeatedly to select "LED SPEAKER", then press ENTER. 3 Press / repeatedly to select the speaker lighting pattern you want, then press ENTER. To turn off the lighting, select "PATTERN OFF".

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
22
US
Creating a party
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
•
FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
•
ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on only
vocal, etc.
•
SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
•
PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
2
Turn DJ CONTROL to adjust the
effect level.
To turn off the effect
Press the selected effect button again.
Notes
•
The DJ EFFECT is automatically turned off
when you turn off the system, change the
function or change the tuner band.
•
If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.
•
You cannot use VOLUME/DJ CONTROL to
adjust the volume when the DJ EFFECT is
activated. Press VOLUME +/– on the remote
control to adjust the volume.
Singing along
You can sing along with any audio source
that played back on this system.
1
Turn MIC LEVEL to MIN to
reduce the microphone volume
level.
2
Connect a microphone to the
MIC jack on the unit.
3
Start playing the music and
adjust the volume.
4
Turn MIC LEVEL to adjust the
microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.
Note
During transferring, the sound from microphone
will not be transferred onto the USB device.
Changing the lighting
pattern on the
speakers
1
Press OPTIONS.
2
Press
/
repeatedly to select
“LED SPEAKER”, then press
ENTER.
3
Press
/
repeatedly to select
the speaker lighting pattern you
want, then press ENTER.
To turn off the lighting, select
“PATTERN OFF”.
Other Operations