Sony LBT-SH2000 Operating Instructions - Page 26
Troubleshooting, Note on DualDiscs
View all Sony LBT-SH2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Notes on playing multisession discs • This system can play back multisession discs when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions can also be played back. • If the first session is recorded in AUDIO CD format, only the first session will be played back. 26US Troubleshooting Should you encounter a problem with your system, find your problem in the troubleshooting checklist below and take the corrective action. If the problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. If "PROTECT" appears in the display panel Immediately unplug the power cord, and check the following items. • Are you using only the supplied speakers? • Is anything blocking the ventilation holes of the unit? After checking the above items and fixing any problems, plug in the power cord again and turn on the system. If the issue persists, consult your nearest Sony dealer. General The clock or timer setting is canceled. • The power cord is disconnected or a power failure occurred. Set the clock (page 12) and timer (page 23) again. There is no sound. • Adjust the volume. • Check the speaker connections (page 10). • Check the connection of the optional equipment, if any (page 10). • Turn on the connected equipment. • There is no audio output during Recording Timer. There is no microphone sound. • Adjust the microphone volume. • Make sure the microphone is connected to the MIC jack correctly.