Sony LBT-SH2000 Operating Instructions - Page 27
Additional Information, Speakers, Disc player - child lock
View all Sony LBT-SH2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
• Make sure the microphone is turned on. There is severe hum or noise. • A TV or VCR is placed too close to the unit. Move the unit away from the source of noise. • Connect the unit to a different wall outlet. • Install a noise filter (commercially available) to the power cord. • Turn off surrounding electrical equipment. The timer does not function. • Check the timer setting and set the correct time (page 23). • Cancel the Sleep Timer function (page 23). The remote control does not function. • Remove the obstacles between the remote control and the unit. • Move the remote control closer to the unit. • Point the remote control at the unit's sensor. • Replace the batteries (R6/size AA). • Move the unit away from the fluorescent light. There is acoustic feedback. • Reduce the volume. • Move the microphone away from the speakers or change the direction of the microphone. "CHILD LOCK" appears when you press any button on the unit. • Set the Child Lock function to off (page 25). "CONNECT ALL SPEAKERS AND CHANGE VOL" appears. • Connect all speakers and adjust the volume to the level that you want. Speakers Sound comes from one channel or unbalanced left and right volume. • Place the speakers as symmetrically as possible. • Check that the speakers are connected securely and correctly. • The source being played back is monaural. There is no sound from a specific speaker. • Check that the speaker is connected securely and correctly. Disc player The system does not eject the disc and "LOCKED" appears. • Consult your nearest Sony dealer or local authorized Sony service facility. The disc cannot be inserted. • Check that the system is turned on. • You cannot insert the disc immediately after turning on the system. The disc does not eject. • You cannot eject the disc during CD-USB Synchronized Transfer or REC1 Transferring. Press x to cancel the transferring, then press Z EJECT to eject the disc. • Consult your nearest Sony dealer. Playback does not start. • Wipe the disc clean (page 31). • Reload the disc. • Load the disc that this system can play back (page 25). • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. Additional Information Continued l 27US