Sony LBT-SH2000 Operating Instructions - Page 30

Tuner Severe hum or noise, or stations cannot be received. ("TUNED" or "STEREO" flashes in the display panel.) • Connect the antenna properly. • Find a location and an orientation that provide good reception, and then set up the antenna again. • Connect a commercially available external antenna. • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. • Turn off surrounding electrical equipment. To reset the system If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system to factory settings. Use the buttons on the unit to perform this operation. 1 Unplug and plug the power cord back in. 2 Press "/1 to turn on the system. 3 Hold down x and follow by "/1 for about 3 seconds. "COLD RESET" appears in the display panel. All user-configured settings, such as preset radio stations, timer, and the clock are reset to factory setting. Messages Disc/Timer CANNOT PLAY You have inserted a disc that cannot be played back on this system. NO DISC There is no disc in the disc slot. NO STEP All of the programmed steps have been erased. NOT IN USE You have pressed a button that the operation is not allowed or invalid at this time. OFF TIME NG The Play Timer or Recording Timer start time and stop time is the same. PUSH SELECT You tried to set the clock or timer during timer operation. PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped. READING The system is reading information of the disc. Some buttons are not available. SET CLOCK You pressed CLOCK/TIMER SELECT before the clock is set. SET TIMER You pressed CLOCK/TIMER SELECT before the Play Timer or Recording Timer is set. STEP FULL You tried to program more than 25 steps. UNLOCK The disc theft-preventive function is released. 30US