Sony LF-B1 Operating Instructions (LF-PK1) - Page 53

Problem Operations are delayed. Cannot use NetAV. The NetAV connection is disconnected suddenly. Causes and remedies • Changing channels and operations performed from the remote control on the screen take place via the network, so response is delayed. This is normal and not a malfunction. • When the rate is too high for the actual speed of your connection, delay is even more likely to occur. Set the rate to auto or lower the rate if you want to use manual. Have never once been able to connect: • Is the setting for watching TV away from home enabled? (1 page 18) • Did you click [Connect] in the bottom left of the LocationFree Player screen? Can connect to the Internet from a computer at home, but there is no picture while away from home: • A communication connection with a download speed at least 300 kbps is recommended. Check your communication connection. • Is the computer you are using away from home connected to the Internet? • Did you click [Connect] on the bottom left of the LocationFree Player screen? • Has security software been installed? If so, the firewall function of the security software may be causing NetAV to disconnect. • Problems with the Internet connection may cause the NetAV connection to be disconnected. Base Station Settings (Common) Problem Cannot open the base station settings screen. Authentication of the user name and password for opening the setup screen fails. Forgot the password for opening the setup screen. Causes and remedies • [Base Station Settings] cannot be clicked when connecting to the base station for the first time. Try connecting first. • [Base Station Settings] cannot be clicked when the base station and computer are not on the same LAN. • If [Base Station Settings] cannot be clicked when you are using a wireless connection, make sure the wireless network is connected to the SSID of that base station. • When connecting the base station to a network that requires a proxy, click [LAN Settings] under [Local Area Network (LAN) settings] on the [Connections] tab of [Internet Options] in Internet Explorer, then click [Advanced] and set the IP address of the base station as an address that does not use a proxy. LocationFreeTV FAQ pages: http://www.sony.com/locationfree/faq/ • If you set the wrong IP Address to your Base Station connecting with a Wired LAN, you cannot connect to the Base Station any more. In this case, change the settings by connecting to the Base Station directly with wireless or, initialize the Base Station. • Did you enter uppercase letters instead of lowercase letters, or vice versa? The base station distinguishes between uppercase and lowercase letters. • Did you enter the correct user name? The user name is lfx (lowercase letters). • Did you enter the correct password? The default password is printed on the label on the side of the base station. • The default password is printed on the label on the side of the base station. • If you changed the password and forgot the new password, the base station will need to be initialized (1 page 48). After initializing the base station, enter the password printed on the label on the side of the base station. Others 53