Sony LF-X1 LFAPC1 Software Instructions - Page 10

Preparations Prior to Access from a Remote Location Pre-release version Preparations Prior to Access from a Remote Location Step 2 Setting Up Your Computer If you are using a personal firewall on your computer (contained in Windows XP or on products like Norton Internet Security), or if you are using a home router, you will need to configure your computer to use NetAV. Follow the instructions below to complete this configuration. Step 3 Setting Up the NetAV Function Perform this step using the LF-X1 or LF-X5. This step summarizes how to configure the base station settings to use the NetAV function. For details, refer to the LF-X1/LF-X5 operating instructions. 1 Refer to "Setting Up NetAV" in the "What's NetAV" section of the LF-X1/ LF-X5 operating instructions to perform the setup. 2 Specify an IP address and the other information of the base station with the LF-X1 or LF-X5 monitor. To use the NetAV function, you need to specify a static IP address in the [LAN (DHCP/Manual IP address settings)] screen. Select [Settings], [Base station], [Internet Connection], [LAN (DHCP/ Manual IP address settings)], and then [Settings]. . Clear the check box Specify a static IP address (1) Make sure [Automatic IP address configuration (DHCP)] check box is selected and jot down the information in all of the fields*. * If the [Automatic IP address configuration (DHCP)] check box is not selected, select the check box and click [Set]. The information in the fields appears in several seconds. 10 Step 2 Setting Up Your Computer