Sony LF-X1 LFAPC1 Software Instructions - Page 11
Select [Settings], [Base station], [NetAV Settings], and then [Enable/Disable, does not appear
View all Sony LF-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparations Prior to Access from a Remote Location Pre-release version (2) Clear the [Automatic IP address configuration (DHCP)] check box. The information in the fields will clear, which releases the "automatic" IP settings. (3) Enter again the information you jot down in step (1) - with one exception: For the IP address, be sure to change the last two digits to 64*. * If you entered a different IP address for the port forwarding or DMZ settings of your router, make the last two digits match that address. (4) Click [Set] to lock in the IP address and other important information on this screen. z Tip Jot down the IP address that you specify. You will need it to establish a connection to the base station from your computer. 3 Connect to the Internet to confirm that LAN settings are correct. Go to the Web function. If the web page appears, your settings are correct. If the web page does not appear, you may not have entered the information correctly in Step 2. Go back and confirm that information has been entered correctly. 4 Configure the base station NetAV. Select [Settings], [Base station], [NetAV Settings], and then [Enable/Disable NetAV]. To send video from the base station to a remote computer in the [Enable/ Disable NetAV] screen as described below. Select [Enable] Specify a port number (5021 is commonly used) 11 Step 3 Setting Up the NetAV Function