Sony LF-X1 LFAPC1 Software Instructions - Page 37

Pre-release version Problem Solutions The feed from a device connected to the base station is not displayed. • Verify that any peripheral devices are correctly connected to the base station. • Verify that the supplied IR Blaster is correctly installed and that the on-screen remote control is correctly configured. For details, refer to the LF-X1/LF-X5 operating instructions. Assigned channels do not display. • Try changing the CABLE ON/OFF setting. The picture is distorted. • Update to the newest display driver provided by the maker of your monitor. Cannot display the on-screen remote control or cannot click [Remote]. • Verify that the supplied IR Blaster is correctly installed and that the on-screen remote control is correctly configured. For details, refer to the LF-X1/LF-X5 operating instructions. • Verify that the on-screen remote control is correctly configured in the LocationFree Player settings screen (1 page 20). The Settings button or Vol button does not appear. • If the window size is too small, some buttons may not be shown. Make the window larger to see the buttons. Video does not appear when I select TV, • If you are not using the LocationFree TV internal tuner, you must Video 1, or Video 2 in the [INDEX] window use the remote control to display video. and click [Connect]. The remote control responds to a single • Verify that you don't hold down the mouse button too long when button push as though the button were pushed clicking. Try to keep your mouse clicks short. several times. • Verify that the specified rate is not too high in relation to the actual line speed. Try lowering the rate. Others 37 Troubleshooting