Sony MEX-1HD Operating Instructions - Page 47
Adjusting the bass and treble, — BAS/TRE
View all Sony MEX-1HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Adjusting the equalizer curve You can adjust and store the equalizer settings for frequency and level. 1 Press (SOURCE) to select a source. 2 Press the L dial, then rotate the L dial to select "EQ7." 3 Press the L dial. 4 Rotate the L dial to select the desired equalizer curve, then press (F2) (TUNE). 5 Press the L dial repeatedly to select the desired frequency. Each time you press the L dial, the frequency changes as follows: 62Hz t 157Hz t 396Hz t 1.0kHz t 2.5kHz t 6.3kHz t 16kHz t 62Hz 6 Rotate the L dial to adjust the level. The level is adjustable between -10 to +10 steps. Adjusting the bass and treble - BAS/TRE SOURCE L dial 1 Press (SOURCE) to select a source. 2 Press the L dial. The sound list display appears. 3 Rotate the L dial to select "BAS" or "TRE," then press the L dial. 7 Press (F3) ( ). The normal display appears. To restore the default setting Press (F2) (INIT) in step 5. 4 Rotate the L dial to adjust the level. The bass/treble level is adjustable between -10 to +10 steps. 5 Press the L dial. The normal display appears. Note If DSO is set to "On," or EQ7 is selected, the effects of BASS and LOUD may be hard to be recognized. 47