Sony MEX-1HD Operating Instructions - Page 8

Getting Started, Resetting the unit, Detaching the front panel - memory stick

Page 8 highlights

Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ball-point pen. Notes • If you detach the panel while the unit is still turned on, the power will turn off automatically. • Do not drop or put excessive pressure on the front panel and its display window. • Close the front panel before you detach it. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on the dashboard/rear tray. Tip When carrying the front panel with you, use the supplied front panel case. Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push the left side into position until it clicks. RESET button Note Pressing the RESET button will erase the clock setting and some stored information. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. Caution alarm If you turn the ignition switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. 1 Press (OFF)*. CD, HDD, "MG Memory Stick" playback or radio reception stops (the key illumination and display remain on). * If your car has no ACC position on the ignition switch, be sure to turn the unit off by pressing (OFF) for 2 seconds to avoid car battery drain. 2 Press (RELEASE) to open up the front panel and pull it off towards you. A B Notes • Do not put anything on the inner surface of the front panel. • Do not detach the front panel during the eject operation. If the front panel is detached during eject, operation will stop. To remove the disc with the front panel detached: through hole C, press Z (OPEN/CLOSE) inside the unit with a pointed object, such as a ballpoint pen. C (OFF) (RELEASE) 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

8
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Remove the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored information.
Detaching the front panel
You can detach the front panel of this unit to
protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
1
Press
(OFF)
*
.
CD, HDD, “MG Memory Stick” playback or
radio reception stops (the key illumination
and display remain on).
*
If your car has no ACC position on the ignition
switch, be sure to turn the unit off by pressing
(OFF)
for 2 seconds to avoid car battery drain.
2
Press
(RELEASE)
to open up the front
panel and pull it off towards you.
Notes
If you detach the panel while the unit is still turned
on, the power will turn off automatically.
Do not drop or put excessive pressure on the front
panel and its display window.
Close the front panel before you detach it.
Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
car or on the dashboard/rear tray.
Tip
When carrying the front panel with you, use the
supplied front panel case.
Attaching the front panel
Attach part
A
of the front panel to part
B
of the
unit as illustrated and push the left side into
position until it clicks.
Notes
Do not put anything on the inner surface of the front
panel.
Do not detach the front panel during the eject
operation. If the front panel is detached during eject,
operation will stop.
To remove the disc with the front panel detached:
through hole
C
, press
Z
(OPEN/CLOSE) inside
the unit with a pointed object, such as a ball-
point pen.
RESET button
(RELEASE)
(OFF)
A
B
C