Sony MZ-R900DPC Operating Instructions - Page 21
Various ways of recording, Two ways of connecting to a sound source
View all Sony MZ-R900DPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Various ways of recording Two ways of connecting to a sound source The input jack of this recorder works as both digital and analog input jacks. Connect the recorder to a CD player or a cassette recorder using either digital (optical) input or analog (line) input. To record, see " Recording an MD right away!" (page 16) to record using digital (optical) input, and " Recording with analog input (line cable required)" (page 22) to record using analog (line) input. Difference between digital (optical) and analog (line) inputs Difference Digital (optical) input Analog (line) input Connectable Equipment with an digital (optical) source output jack Usable cord Optical cable (with an optical or an optical-mini plug) (page 16) Equipment with an analog (line) output jack Line cable (with 2 phono plugs or a stereo-mini plug) (page 22) Signal from Digital the source Analog Even when a digital source (such as a CD) is connected, the signal sent to the recorder is analog. Recorded track numbers Recorded sound level Marked (copied) automatically • at the same positions as the source (when the sound source is a CD or an MD). • after more than 2 seconds of blank or low-level segment (with a sound source other than a CD or an MD). • when the recorder is paused during synchro-recording (the recorder pauses automatically when it encounters a section with no audio signal for 3 seconds or more). You can erase unnecessary marks after recording. (" Erasing a track mark" , page 44). Marked automatically • after more than 2 seconds of blank or low-level segment. • when the recorder is paused while recording. • automatically at specified intervals when the Auto Time Stamp is on. You can erase unnecessary marks after recording (" Erasing a track mark" , page 44). Same as the source. Can also be adjusted manually (Digital REC level control) (" Adjusting the recording level manually (Manual recording)" , page 27). Adjusted automatically. Can also be adjusted manually (" Adjusting the recording level manually (Manual recording)" , page 27). Note Track marks may be copied incorrectly: • when you record from some CD players or multi disc players using digital (optical) input. • when the source is in shuffle or program play mode while recording using digital (optical) input. In this case, play the source in normal play mode. • when recording BS or CS programs through digital (optical) input. 21-GB