Sony MZ-R900DPC Operating Instructions - Page 40

Checking the remaining time or the playing position You can check the track name, disc name, etc. during playback. On the recorder Jog lever (L) 1 While the recorder is playing, press the jog lever (L), flip the lever until " DISPLAY" flashes in the display, and then press the lever again. 2 Flip the jog lever (L) until the information you want flashes in the display. Each time you flip the lever, the display changes as follows. LapTime (The elapsed time.) r 1 Remain (The remaining time of the current track.) r AllRemain (The remaining time after the current location.) r RecDate (Recording date and time.) 3 Press the jog lever (L). The display changes as follows. Display window on the recorder A B A Track number Track number1) Number of tracks after the current track2) Recorded date3) B Elapsed time Remaining time of the current track Remaining time after the current location. Recorded time3) 1) If the track is labeled, " " appears in the display followed by the track name. 2) If the disc is labeled, " " appears in the display followed by the disc name. 3) Appears only when the clock is set. z The display that appears on the remote control is different from the ones on the recorder. See " On the remote control" (page 41) to check the display that appears on the remote control. 40-GB