Sony MZ-R900DPC Operating Instructions - Page 37
Press RPT/ENT., To select a preset sound, Factory settings of the Digital Sound, Preset, Notes
View all Sony MZ-R900DPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2 During playback, press SOUND for 2 seconds or more. The recorder changes to bass-setting mode. Pressing the SOUND button for 2 seconds again changes the recorder back to treble-setting mode. When you select bass-setting mode, "B" appears. When you select treblesetting mode, "T" appears. 3 Turn the control on the remote control towards . or towards N> repeatedly to adjust the bass or the treble. Example: While adjusting the bass The cursor moves. (Position: -2) -4 ±0 +3 Pressing the SOUND button for less than 2 seconds toggles the display between " SOUND1" and " SOUND2" . When you press SOUND for a short time while adjusting the bass or treble, the setting for that sound is entered and the display switches to the other sound setting. The sound can be adjusted in 8 steps (- 4, - 3, ...±0, ...+2, +3). 4 Press RPT/ENT. The sound settings are saved and the playback display appears again. To select a preset sound On the remote control, press SOUND repeatedly to select " SOUND1" or " SOUND2" or nothing appears in the display. On the recorder, press the jog lever (L), flip the lever until " SOUND1" , " SOUND2" , or " SOUND OFF" flashes in the display, and then press the jog lever (L). Factory settings of the Digital Sound Preset Factory settings of the Digital Sound Preset are the followings: • " SOUND1" : bass +1, treble ±0 • " SOUND2" : bass +3, treble ±0 z • The settings can be stored to the Personal Disc Memory (page 38). • Settings can also be changed while playback is momentarily paused (X). Notes • Settings cannot be changed through the operation buttons on the recorder. • Digital Sound Preset becomes inoperative when the " AUDIO OUT" parameter for the i/LINE OUT jack is set to " LINE OUT" . In this case, set the " AUDIO OUT" to " HeadPhone" (page 20). • Sound distortion may occur when you use Digital Sound Preset. In this case, lower the volume or change the settings. • Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound. 37-GB