Sony NW-MS70D Operating Instructions - Page 23
What is the Group function?, Basic Operations - support
UPC - 027242604247
View all Sony NW-MS70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Basic Operations 2 Start playback. 1 Press the Play/Stop button. 2 Rotate the VOL (+/-) control to adjust the volume. HOLD switch (Set to off.) z Tip If your Network Walkman is not operated for 10 seconds while in stop mode, the display automatically turns off. When scrolling track titles, etc., the display turns off after scrolling is finished. When the normal playback mode is selected, playback stops automatically after the last song is played*. * When a "Memory Stick" (not supplied) is inserted into the slot, songs stored in the "Memory Stick" will be played after the last song in the built-in flash memory is played. If playback does not start Make sure that the HOLD switch is set to off (page 32). To stop playback Press the Play/Stop button. To adjust the volume The volume can be set in the PRESET and MANUAL mode (page 35 to 36). What is the Group function? The Group function enables you to select favorite music conveniently on your Network Walkman. You can transfer or play songs by album or artist using the Group function. Note that the group information may be erased or damaged if a song that is transferred to "Memory Stick" using the Group function is edited with a device that does not support the function. Built-in flash memory "Memory Stick" Group1 Group2 Group3 Track1 Track2 Track3 Track1 Track2 Track3 Track1 Track2 Track3 Group4 Group5 Group6 Track1 Track2 Track3 Track1 Track2 Track3 Track1 Track2 Track3 • Playback starts in order of the songs in the built-in flash memory, and then data in the "Memory Stick". • The track number is the order of songs in each group. • You can switch between Track Name mode and Group mode by pulling the Shuttle switch. • In the Group mode, group names are displayed instead of track names. In addition, any shift operations, such as Skip or Repeat, are performed by group. Track1 Track2 Track3 Track1 Track2 Track3 Transferring by group The audio files transferred to the SonicStage software are always grouped when transferred to the built-in flash memory or a "Memory Stick". Track1 Track1 continued 23