Sony PCM-D10 Help Guide - Page 146

Help Guide Linear PCM Recorder PCM-D10 Setting the time period before the linear PCM recorder goes into low power consumption mode (Auto Standby) You can set your linear PCM recorder to go into low power consumption mode if it is left unused for the specified period time. 1 Select [ Settings] - [Common Settings] - [Auto Standby] from the HOME menu, and then press . 2 Press or to select the desired time period, and then press . 3 Press and hold BACK/HOME to return to the HOME menu. To return to the screen before you displayed the HOME menu, press STOP. Description of menu items You can select one of the following items: OFF: Turns off the Auto Standby function. 5min: Places the linear PCM recorder into low power consumption mode in approximately 5 minutes. 10min: Places the linear PCM recorder into low power consumption mode in approximately 10 minutes. 30min: Places the linear PCM recorder into low power consumption mode in approximately 30 minutes (default setting). 60min: Places the linear PCM recorder into low power consumption mode in approximately 60 minutes. Hint The Auto Standby function is still active while a Bluetooth connection is established. When your linear PCM recorder goes into low power consumption mode, the Bluetooth connection is disconnected. To avoid this, change the time period for the Auto Standby function to suit your needs. Related Topic Turning the power on Releasing the linear PCM recorder from the HOLD state 4-744-529-11(2) Copyright 2018 Sony Corporation 146